Research on Radial Stress-strain Model of Wood under Repeated Compressive Loading

XIE Qifang, ZHANG Lipeng, WANG Long, WU Fanfan

Abstract

The radial stress-strain relationship of wood under monotonic and repeated compressive load was studied, according to the tests on the clear wood specimens under monotonic and repeated compressive load. The results show that the monotonic compressive stress-strain curve and the skeleton curve of repeated compressive stress-strain curve are well coincident when the strain is less than 0.16. When the strain is over 0.16, the difference between these two is gradually increased, but they can still be described by the same mathematical model. In the cyclical process, the reloading path and unloading path are expressed by linear and double fold line models, respectively. Based on the comprehensive consideration of the typical characteristics of unidirectional compression and repeated loading and unloading, the stress-strain model of wood under repeated compressive load was established. Based on the established model, a MATLAB program was then written into the MATLAB software. Good consistency was found between the predictions of the model and the test results.

 

Keywords: wood,  compressive performance in radial direction,  cyclic loading,  stress-strain model,  MATLAB


Full Text:

PDF


References


ZHANG J,WANG B.ZONG Z L. et al. Experimental study on fire endurance of mortise-tenon joint in timber structures [j]. Journal of Hunan University (Natural Sciences) ,20l6.43( 1): 118-123. (In Chinese)

PAN Y. LI L J. WANG H Q. et at. Reseach on evaluation method for the post-earthquake damage state of ancient wooden buildings [j]. Journal of Hunan University (Natural Sciences) .2016.43( 1): 132- 142. (In Chinese)

LIU Y X.ZE Y J. Quantitative expression on the large transverse compressive deformation relationships between stress and strain of vood [J]. Scientia Silvae Sinicae. 1995, 5(31). 436 - 441. (In Chinese)

TAO J L,JIANG P. YU Z S. On the static constitutive relation of wood with large deformation [j]. Mechanics in Engineering. 2000.22(5). 25-27. (In Chinese)

RE1TERER A. ST ANZL-TSCI I EGG S E. Compressive behaviour of softwood under uniaxial loading at different orientations to the grain[j]. Mechanics of Materials, 2001, 33( 12): 705 - 715.

ZHANG II W, HU B. SIIAO Z P. Stress strain relationship with compression of poplar [j]. Journal of Anhui Agricultural University.2010.37(4)s 665 -668. (In Chinese)

MENG X J. CHEN J Y. SHI X W. et al. An experimental study of the wood performance under whole section compression in the transverse direction ~J1. China Sciencepaper.2016,11 (1): 62 -65. (In Chinese)

OUDJENE M. KHEL1FA M. Elasto-plastic constitutive law for wood under compressive loadings [J]. Construction and Building Materials.2009.23( 11).3359-3366.

OUDJENE M. KHELIFA M. Finite element modeling of wooden structures at large deformations and brittle failure prediction []]. Materials and Design.2009.30( 10) :4081 - 4087.

CHEN Z Y.PAN J L.ZMU E C. Numerical simulation of mechanical behaviour of wood under complex stress _j]. Chinese Journal of Computational Mechanics,2011,28(4),629 -640.(In Chinese)

KHENNANE A. KHELIFA M. BLERON L. et al. Numerical molelling of ductile damage evolution in tensile and bending tests of timber struct ures [J]. Mechanics of Materials,2014 .68 (1):228 236.

VALIPOUR H.KHORSANDN1A N.CREWS K. et al. A simple strategy for constitutive modeling of timber[J]. Construction and Building Materials,2014,53(4)s 138 -148.


Refbacks

  • There are currently no refbacks.