Study on Reinforced Concrete Beams’ Stiffness and Deflection Strengthened with High-performance Ferrocement Laminate After the Fire

ZENG Linghong, JIANG Chaoyang

Abstract

Combined with domestic and international research on the mechanical properties of concrete and steel after fire, a three-step model and a two-step model were used to calculate the elastic modulus of concrete and steel simply, respectively. According to the simplified calculation model and the equivalent elastic modulus method, an equivalent cross-section elastic modulus of reinforced concrete beams was obtained after fire. Based on the effective moment of inertia method, the cross section of the reinforced concrete beam was equivalently translated before and after the reinforced concrete beam cracked. Area of the whole cross-section mortar and the reinforced area of tension zone were translated to the effective area whose modulus of elasticity is the concrete modulus of elasticity. Through the experiment data, design formula of the stiffness and deflection of the reinforced concrete beam with high-performance ferrocement laminate after fire was deduced and verified. The calculation results are in good agreement with the experimental ones.

 

 

Keywords: stiffness,  high-performance ferrocement laminate,  fire  strengthening


Full Text:

PDF


References


XIONG Jingang, WU Weixiu, CHENG Wenrang. Analysis and calculation of short RC beam’s stiffness and deformation [J]. Journal of Building Structures, 2003, 33(8): 22 — 24. (In Chinese)

HOU Gaofeng, WEI Jun. Experimental research of mechanical properties of concrete with different rating after high temperature [J]. Construction Quality, 2010, 28 (3): 68 — 70. (In Chinese)

XU Yu, XU Zhisheng, ZHU Ma. Experimental investigation of strength and reformation of concrete after high temperature [J]. Journal of Changsha Railway University, 2000,18(2): 13 — 16. (In Chinese)

WU Во. YUAN Jie. WANG Guangyuan. Experimental study on mechanical properties of high strength concrete after high temperature[J]. China Civil Engineering Journal. 2000. 33 (2);8—12. (In Chinese)

WU Bo. Mechanical properties of reinforced concrete structure after fire[M]. Beijing: Science Press, 2003: 7 — 60. (In Chinese)

SHEN Rong. FENG Lingyun. RONG Kai. Assessment of the mechanical properties of steel after high temperature (fire) [J]. Sichuan Building Science. 1991. 17 ( 2 ) ; 5 — 9. (In Chinese)

ZHAI Yue. AI Xiaoqin. DENG Ziehen, et al. Influences of cooling mode and high temperature on concrete compressive strength[J]. Journal of Hunan University: Natural Sciences. 2014. 11(11): 74-80. (In Chinese)

XIE Ileping. Damage mechanics of rock and concrete [М]. Xuzhou: China University of Mining and Technology Press. 1990:116-146. (In Chinese)

LEMAITRE J. How to use damage mechanics [J]. Nuclear Engineering and Design. 1984.80(03):233 —245.

Wei. Calculation of diagonal section resistance and engineering application of strengthening restructures using HPFL [J]. Journal of Hunan University: Natural Sciences. 2011. 38(2): 1 -7. (In Chinese)

BRANSON D E. Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams[R]. Alabama: Alabama Highway Department/US Bureau of Public Roads. 1963: 1-78.

WANG Chuanzhi. TENG Zhiming. Theory of reinforced concreted concrete structure[M]. Beijing; China Architecture and Building Press, 1985: 350-351


Refbacks

  • There are currently no refbacks.