Research on the Indirect Contact Liquid Cooling Heat Dissipation Structure of Lithium-ion Battery Pack

HU Xingjun, HUI Zheng, GUO Peng, YANG Changhai, BANG Jingyu, XUE Chaotan, XIAO Yang, ZHANG J

Abstract

 The heat dissipation of lithium-ion battery pack has been an important factor affecting the battery life and traffic safety of electromobile. In order to explore the effect of different cooling pipeline design on the heat dissipation of lithium-ion battery pack， the surface temperature of a single lithium-ion battery under different conditions was studied by means of numerical calculation，and compared with the test results，the correctness of the simulation method was verified. Under the 27 ℃， the heat dissipation effects of eight different cooling structures were compared and analyzed， finding that the average temperature of 8th structure is 31.62 ℃ and the standard deviation is 0.83， which has the best cooling effect； the design of bidirectional flow， the inlet position ，the shunt situation of branch pipe， and the contact area between the cooling pipe and the battery pack will have different influences on the heat dissipation performance of the battery pack. Therefore， these factors should be taken into consideration in the design of the heat dissipation structure of lithium- ion battery pack.

 

 

Keywords: vehicle engineering,  lithium-ion battery pack,  liquid cooling,  thermal analysis


Full Text:

PDF


References


YOUNG SAM C. China to give stimulus for development of electric vehicles [N]. Bloomberg News,2012.

HARUYOSHI K. Technology development of Nissan´s electric vehicle and future vision[C]//Zero Emission Forum. 2010:8—20.

MAYOR L. Electric vehicles market development [C]//The NYC Global Partners'Innovation Exchange Forum.2010:43—53.

SCROSATI B, GARCHE J. Lithium batteries: Status, prospects and future [J]. Journal of Power Sources,2010,195(9):2419— 2430

YANG Y L, ZHANG X, LI L J,et al. The cooling structures of Ni–MH batteries in hybrid–electric vehicles [J]. Journal of Chongqing University, 2009, 32 (4):415—419 (In Chinese)

KIZILEL R, LATEEF A, SABBAH R, et al. Passive control of temperature excursion and uniformity in high-energy Li –ion battery packs at high current and ambient temperature[J]. Journal of Power Sources, 2008, 183 (1):370—375.

AHMAD A P,STEVE B, MATTHEB D. An approach for designing thermal management systems for electric and hybrid vehicle battery packs [C]//The Fourth Vehicle Thermal Management Systems Conference and Exhibition.1999:5—9.

CHEN Y H, BU B J, LIU H B, et al. Study on sorting technology for Lithium –ion power battery of electric vehicle [J]. Journal of Hunan University (Natural Sciences),2016,43 (10):23—31. (In Chinese)

AHMAD A P. Battery thermal models for hybrid vehicle simulations [J]. Journal of Power Sources, 2002, 110 (2):377—382.

XU X M. Reseach on the thermal flow field synergy of electric vehicle cooling system and the key problems of liquid cooling [D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012: 3—4 (In Chinese)

CHEN L T, XU S C, CHANG G F,et al. A study on the flow field characteristics of HEV battery thermal management system [J]. Automotive Engineering, 2009, 31(3):224—227 (In Chinese)

SUI Y H,BANG B,XIA B J,et al. Optimal analysis on ventilation structure of Ni–MH battery pash for HEV [J]. Automotive Engineering, 2010, 32 (3):203—208 (In Chinese)


Refbacks

  • There are currently no refbacks.