Cyclic Constitutive Model Based on Dislocation Densityof Face-centered Cubic Metals

Ren Xuehong, Yang Shaopu, Wen Guilin, Zhao Wenjie

Abstract

Under the framework of crystal plasticity theory,  a cyclic constitutive model based on dislocation density for face-centered cubic metals is proposed. The total dislocations are discretized into edge and screw components,  and the multiplication,  annihilation and interaction of dislocations are considered as the basic evolutionary mechanisms. At the same time,  a cyclic constitutive model of single crystal is established by using the modified non-linear kinematic hardening rule. Then,  the model is extended from single crystal scale to polycrystalline scale by explicit scale transition rule. The ratchetting strain of polycrystalline copper with typical face-centered cubic structure is simulated by using the proposed model. The numerical results show that the model can not only simulate the ratchetting strain and cyclic hardening characteristics of materials at polycrystalline scale,  but also predict the ratchetting of materials at different orientations and stress levels from single crystal scale.

 

 

Keywords: dislocation density,  crystal plasticity,   constitutive model,   ratchetting strain



Full Text:

PDF


References


OHNO N. Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity [J]. Applied Mechanics Review, 1990, 43(11): 283—295.

KANG G. Ratchetting:recent progresses in phenomenon observation, constitutive modeling and application [J]. International Journal of Fatigue, 2008, 30(8):1448—1472.

CHABOCHE J L. A review of some plasticity and viscoplasticity constitutive theories [J]. International Journal of Plasticity, 2008, 24(10):1642—1693.

BARI S, HASSAN T. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation [J]. International Journal of Plasticity, 2002, 18(7):873—894.

ZHAO W, YANG S, WEN G, et al. Fractional -order visco -plastic constitutive model for uniaxial ratcheting behaviors [J]. Applied Mathematics and Mechanics (English Edition), 2019, 40(1):49— 62.

FEAUGAS X, GAUDIN C. Ratchetting process in the stainless steel AISI 316L at 300 K:an experimental investigation[J]. International Journal of Plasticity, 2004, 20(4/5):643—662.

KANG G, DONG Y, WANG H, et al. Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation [J]. Materials Science & Engineering A (Structural Materials:Properties, Microstructure and Processing), 2010, 527 (21/22):5952— 5961.

DONG Y, KANG G, LIU Y, et al. Dislocation evolution in 316 L stainless steel during multiaxial ratchetting deformation [J]. Materials Characterization, 2012, 65:62—72.

XU B, JIANG Y. A cyclic plasticity model for single crystals[J]. International Journal of Plasticity, 2004, 20(12):2161—2178.

CAILLETAUD G, SAI K. A polycrystalline model for the description of ratchetting:effect of intergranular and intragranular hardening [J]. Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing), 2008, 480 (1/2):24— 39.

ARMSTRONG P J, FREDERICK C O. A mathematical representation of the multiaxial bauschinger effect[J]. Materials at High Temperatures, 1966, 24(1):1—26.

KANG G, BRUHNS O T, SAI K. Cyclic polycrystalline visco-plastic model for ratchetting of 316L stainless steel [J]. Computational Materials Science, 2011, 50(4):1399-1405.

LUO J, KANG G Z, DONG Y W, et al. Modeling for ratcheting of polycrystalline copper and aluminum by cyclic crystal plasticity[J]. Advanced Engineering Sciences, 2012, 44 (s2):80-83. (In Chinese)

XIAO X. Experimental study on uniaxial ratcheting effect and crystal plastic constitutive model of polycrystalline copper [D]. Nanjing:School of Science, Nanjing University of Science and Technology, 2018:10—17.(In Chinese)

CHEONG K S, BUSSO E P. Discrete dislocation density modelling of single phase FCC polycrystal aggregates [J]. Acta Materialia, 2004, 52(19):5665—5675.

ABD E A A, XU Y, SANGYUL H, et al. Computational homogenization of tensile deformation behaviors of a third generation Al-Li alloy 2060-T8 using crystal plasticity finite element method[J]. Materials Science and Engineering:A, 2018, 731:583—594.


Refbacks

  • There are currently no refbacks.